• 1-7

QC1-Quick-Connects

QC1-Quick-Connects

IntroductionCIR-LOK QC1 quick-connects have been well accepted and widely used in a variety of industries. A wide variety of end connectors are offered for all types of installation.NACE compliant materials and oxygen clean are also available, along with an extensive list of materials of construction.Working pressure is up to 3000 psig (206 bar),working temperature is from -50℉ to 500℉ (-45℃ to 260℃).Operation of CIR-LOK quick-connects is: Use filters ahead of quick-connects. Use body and stem protectors or dust caps on uncoupled bodies and stems.Align bodies and stems when coupling or uncoupling.Couple and uncouple quick-connects at room temperature.Couple and uncouple quick-connects during system cleaning operations.Support hanging hoses or other equipment to prevent side load.Relubricate stem seal O-rings periodically.
FeaturesMaximum working pressure up to 3000 psig (206 bar) Working temperature from -50℉ to 500℉ (-45℃ to 260℃) Push to connect and pull on knurled sleeve to disconnect enables easy operation Minimal spillage upon disconnect and minimal air inclusion upon connect Materials: stainless steel or brass Wide range of seal materials available Single-end shutoff and double-end shutoff stems Large number of Superior locking balls retains stem Interchangeable and intermixable with major
AdvantagesRedesigned stem insert requires just one O-ring seal, yet improves O-ring containment Locking dog mechanism with large contact area retains stem Push-to-connect coupling enables quick, easy operation Heavy-duty sleeve shields open end of body Wide range of seal materials available 100% factory tested
More OptionsOptional SS316,SS316L,SS304,SS304L,brass body material